How often must slings be inspected?

How often must slings be inspected?

Sling Inspection Form

WARNINGS Read the instructions and warnings contained on the product before using any fall protection device 2. INSPECTION Fall protection devices MUST be inspected before each use. TRAINING Fall protection users MUST be trained by a competent person 4. RESCUE PLANNING Reducing the time between the occurrence of a fall and the user’s medical attention is of vital importance. A rescue program MUST make it a priority to use fall protection equipment. 5. COMPATIBILITY CONNECTIONS Only mutually compatible items should be used. 6. AFTER A FALL Fall protection elements subjected to an impact MUST be removed from service.

1.1 Faulty webbing or stitching 1.2 FITTINGS – D-RINGS Check for deformations, cracks, excessive corrosion and/or rough or sharp edges. D-ring should rotate freely and proper seams on D-rings. Any irregularity is cause for rejection.

Sling Standard

The use of steel wire rope slings is very frequent in load works, however, their correct handling and maintenance must be present during their use to guarantee their good condition.

Lifting loads may be an essential part of the processes you perform in your industry, or it may be an activity that is performed from time to time to complete a job. Regardless of the purpose or frequency with which you lift any load using wire rope slings, it is imperative to consider the importance of always maintaining safety on the job.

In order to use steel wire rope slings safely and efficiently in lifting, it is necessary to implement a proper technique that allows you to avoid risks, such as falling loads, rope wear or accidents that affect your integrity or that of your work team.

Read more  What is an Acas EC certificate?

Before reaching your hands, steel wire rope slings are carefully tested by the manufacturer and go through a quality process, this is what allows the tool to meet the objectives and resist the loads for which it was manufactured.

Sling Inspection

1. INTRODUCTIONWhen handling loads, auxiliary means are often interposed between the loads and the device or mechanism used, which serve to clutch them in order to facilitate lifting or moving them, while at the same time making this operation safer.

2. OBJECTIVESThis NTP aims to define and describe steel chain slings for general lifting applications. It covers 1-, 2-, 3-, and 4-strand slings and endless slings assembled by means of a slinging device:

Prevention and protection measures are specified by describing the characteristics of chain slings, rules for safe use, marking, storage requirements, maintenance and replacement rules for chain slings.

The nominal length of a sling is measured between supports, as shown in Figures 1 a), 2 and 3. Dimensions of the linksIn the UNE-EN 818-2 Standard, the dimensions and tolerances that chain links must have are shown.

Check list of slings

Presentation of the topic: “PROPER USE OF SLINGS. THE INSPECTION PROCESS Each sling is individually identified and recorded by area of work, serial number (if any)” – Transcription of the presentation:

THE INSPECTION PROCESS Each sling is individually identified and recorded by work area, serial number (if available) dimensions, load, type, application and condition. Products that are not in optimum condition, according to international safety standards, i.e., that represent a risk to the safety of the worker or the company, will be identified with a safety seal and labeled as NOT SUITABLE. The inspection of lifting equipment not only helps to maintain its safety, but also increases the confidence of the users in the safety of the products, creating safe working environments and more profitable processes.

Read more  What is a Level 5 Diploma in Education?

TRAINING Users of lifting equipment must be well informed about the safe and correct use of slings and be aware of their responsibilities, which are detailed in the safety standards and regulations applicable to these products. OSHA regulation 1910.184 states that a qualified person is one who, by possession of a recognized degree or certificate of professional competence in a field of application, or who, by extensive knowledge, training, and experience, has successfully demonstrated the ability to solve or resolve problems relating to the subject matter and work. If you are not sure that you are properly trained and knowledgeable, or if you are not sure what rules or regulations apply, ask the supervisor in charge for the appropriate information or be trained in those functions. DO NOT USE a lanyard if you are not sure what you are doing. Lack of skill, knowledge or care may result in an accident or even death.

Read more  How long do chainsaw certificates last?